|
 Code
Blue™
MARTI currently manufactures a
pour-through pitcher system, which
utilizes ARTI-64™ media in conjunction
with other resins to enable effective
filtration of chlorine, lead, copper,
zinc, nitrates and various other impurities
that can be found in tap water. This
system, the Code Blue™ Water
Filtration System, is marketed exclusively
by Essentially Yours Industries, Inc.
(EYI) of Canada. It was designed to
purify water for taste and odor, and
to remove arsenic, nitrates and other
contaminants.
You can get additional information
on the Code Blue™ Water Filtration
System at <www.codebluewater.com>.
Code
Blue Production Procedures »
MARTI DM Series
The MARTI DM Series water filtration
system is designed for industrial,
municipal, and residential arsenic
removal applications and utilizes
its patented ARTI-64™ technology
for medium to large scale ground and
surface water remediation.
The product line consists of four
basic models: DM-50, DM-100, DM-250,
and DM-500. Each system can filter
several thousand gallons of water
per day depending on customer requirements
and the unit specified. To determine
which DM unit would best suit your
process needs, multiply the product
number by 1000. For example, the DM-50
has a volume operating capacity of
50,000 gallons per day.
The DM Series is a proven field-tested
process system that provides significant
arsenic reduction while removing many
other contaminants such as elements
and compounds from either potable
water or wastewater at the treatment
location. For example, a typical DM
unit installed at a south-eastern
United States landfill had influent
arsenic levels ranging from 30 to
as high as 600 parts-per-billion (ppb)
depending on the water source location
being pumped and local rainfall. After
single-pass processing at 35 –
40 gallons-per-minute, arsenic removal
is typically in the single-digit ppb
range and,consequently, is well below
the maximum 60 ppb limit that the
waste treatment authority required.
The DM system has complete flexibility.
The filter columns can be easily configured
to run either in series, parallel,
or any combination of flow patterns.
In addition, each DM Series is fully-automated
and can be designed to incorporate
SCADA technology that will communicate
system data to a central site for
either control or monitoring purposes.
MARTI provides a quality full-service
approach to meeting customer requirements
for removal of arsenic and other contaminants.
Included in your state-of-the-art
DM filtration unit is:
- A complete process system design
compatible with your application
and specifications;
- project management from start
to finish;
- construction and installation
that is on time and within your
budget constraints;
- and system startup, turnover,
and product support.
In addition, through periodic collection
and change-out of the ARTI-64™
media, captured arsenic can be collected
and removed, thus providing a total
turn-key approach to your arsenic
removal needs to meet EPA standards.
Key Product Capability Features:
- Arsenic removal at or below
EPA drinking water standards
- Efficient and cost-effective
solution
- Designed for either potable
water or wastewater filtration
- Water processing from 50 to
500 thousand gallons per day
- Total project management from
design to installation
- Site removal of captured arsenic
as a hazardous waste
MARTI welcomes the opportunity to
discuss your specific arsenic problem
and how we can solve it with a cost-effective
product solution.
|
